On February 17, 2009, Americans will enter the age of digital television — ready or not.
On that date, all full-power broadcast television stations will begin broadcasting only in digital, improving sound and picture quality as well as allowing for stations to offer multiple programming choices, called multicasting.
The government-mandated change will free up needed frequencies for public safety and new wireless communication offerings.
What’s the difference between analog and digital?
Since television was invented, stations have broadcast analog signals, or continuously varying radio waves. The familiar “snow” or ghosting of images is one problem with this way of sending broadcast signals. Another issue is the limited bandwidth for an ever increasing number of television channels.
After the transition, broadcasts will be sent only via digital signals, which use a series of zeroes and ones to transmit data just as a computer does. The result is clearer, more reliable picture and sound as well as the opportunity for more programming options and interactive features.
Because of how a digital signal transmits information, it has more room for additional data. So now television stations that once broadcast on one channel, such as channel 3, can now broadcast on several segments of that channel, for example: 3-1, 3-2, 3-3, 3-4. Each channel could offer specialized programming for a particular audience.
HDTV is the highest level of digital television quality, but it is not the only one. SDTV, or standard definition television format, is the quality at which basic digital broadcasts will be provided. SDTV offers an enhancement over traditional analog broadcasts, but it is not as sharp as HDTV.
What do I need to do to be ready?
If you have an analog input television and currently receive your television service through cable or satellite, you will continue to receive your current stations without needing to purchase additional equipment. However, to receive the full, original quality digital signal, you may need to upgrade your set or get special equipment from your service provider. Simply check with your cable or satellite company for more details.
Note that if your service goes out due to weather or other circumstances, you will no longer be able to receive traditional television channels without a digital tuner or digital-to-analog converter box.
If you have an analog input television and receive your signal via an outside antenna or “rabbit ears,” then you will need to purchase a digital-to-analog converter box to be able to continue watch television. Your set will continue to work as before with gaming consoles, DVD players, VCRs and other similar systems.
The new converter boxes are expected to be available in early 2008 and run between $50 and $70. From January 1, 2008 through March 31, 2009, all U.S. households are eligible for a government coupon program to offset $40 of the cost for up to two boxes per household. A list of eligible boxes is available from the National Telecommunications and Information Administration, which manages the program.
Aside from buying a converter box or signing up for a cable or satellite service, you could also choose to buy a new digital-input ready television. After May 2007, all new televisions must be ready for receiving digital signals or be clearly marked that additional equipment will be needed.
These next generation television sets are the best way to experience all that digital television has to offer.
By: Digital Landing
Archive for the ‘Articles’ category
Our HDTV Antenna Was Worth All The Troubles To Install
December 29th, 2009Let me take the time to explicate what happened to us when we tried to hook up a HDTV antenna so you won’t have to waste your time doing the same situation. First of all our entire family had always wanted a HDTV.
This was a task within it’s self. There must be 100 variant brands and types to determine from! So we did finally attain one that we all agreed upon. After we had set up the TV we learned that we also had to acquire a HDTV antenna to be able to watch our local channels broadcasted in HD.
Our original antenna we tried was purchased at the same place as our TV. After we built it unitedly in the garage we carried it inside and up the stairs to the 2nd level window. We lifted it out the pane and put the 17 yr old on the roof with the antenna.
We utilised walkie talkies to convey between the roof and the family room with the tv. His job was to turn the antenna in littlest increments till the signal came in. The problem was we could only get 2 channels at a time coming in unclouded but never could we get all the channels coming in at one time.
So we brought the antenna in, carried it to the garage, dissembled it and took it back to buy a bigger one and go through the complete work again. Once more on top of the roof with the 17 yr old. Twisting and turning and all the while in a rainfall storm.
It wasn’t that bad but still raining all the same. This went on for about a total of 4 nights in the period of Dec during the cold and precipitation. We could never get this HDTV antenna to convert so we finally gave up.
We brought the big monster antenna in again dissembled it and put it back in the car to return. I was gladsome it didn’t work because it looked horrendous up there on the roof. It stuck out like a tender thumb.
Then we did some research on the net and found an antenna that claimed to do everything we required and the best part was it was cheaper and way way smaller. Actually in wasn’t no bigger than the size of a cooky sheet. So we purchased the HDTV antenna and brought it home.
No assemblage required and we put the 17yr old back on the roof with the walkie talkies again and this time we had a signal before we even tried to alter the antenna.
It was implausible.. we found all the channels reaching in crystal clear without even trying to set the antenna in the perfect “sweet” spot that we were use to setting with the previous additional two. Just by putting it on the roof and pointing it in the general direction where the stations were located was all that was necessary!
Apparently this HDTV antenna was a much higher caliber antenna. If I would have known this 5 days before, I could have saved all those evenings, the poor kid on the roof and the aggrevation it took for our household to eventually bask HDTV!
By: Jim Williams
ATSC Converter Box for US/Canada/Mexico + free digital TV antenna
December 29th, 2009Note:
1) The ATSC converter box has to be used together with a Digital TV Antenna, which would be sent to you for free if you buy the converter on our site.
2) The video system of this converter is ATSC, a set of standards developed by the Advanced Television Systems Committee for digital television transmission that replaced much of the analog NTSCTV system in the United States and will replace NTSC in Canada and in Mexico. So before you add it to your cart, please confirm the TV system used in your area. Here we cite a map from Wikipedia for reference. For more info, click here>>
Features:
Compliant with ATSC A/52 and QAM ITU-T J.83 ANNEX B 64/256
Use high performance ATSC/QAM demodulator
Provide antenna power supply function for pair use with active antenna
Favorite channel list. Closed caption supported
AV input for other DVD/GPS/GAME application
OSD options: English, Spanish and French
Electronic program guide (EPG) and on screen channel Information
Software upgrade available by PC
Wide DC power input from DC 9V to 24V suitable for car.
Video, stereo audio and YC output
HDTV signal scale to SDTV 720X480P or 480I output
Packing:
User’s manual x1
Remote control unit (RCU) x1
Extended R/C Receiver x1
Mounting LUGx2 with screw x4
A/V Wire x1
Power supply CORD x1
Specifications
Tuner
R Input FULL BAND 57MHz ~ 803MHz Input Impedance 75 Signal Level -78dBm ~ -25dBm Connector Type F Terminal Channel Band Width 6M
Demodulator
Standard ATSC A/52 and QAM
ITU-T J.83 ANNEX B 64/256 DemodulationATSC-8VSB OR CABLE 64/256QAM
Video Decoder
Standard MPEG-2 MP@HL Transport Stream ISO/IEC 13818-1 MPEG-2 Video Aspect Ratio 4.3 / 16.9 Video System NTSC Video Resolution 720*480p@30fps or 720*480i@30fps Video Output 1Vpp+0.3Vpp
Audio Decoder
Standard ISO/IEC 11172-3 Audio Decoder MPEG-1 audio Layer Audio Channel ST Audio language English, Spanish and French Audio Output 1Vpp 47K Ohm Adjustable Wi th E Volume
By: xiechengwangda